Double nitrile coating on polyamide lining. Third rough foam nitrile coating on palm and fingertips. Length: 35 cm. Thickness: 1.15 mm on cuff – 1.30 mm on palm.
Support: 100% polyamide.
Coating: Nitrile.

Colour
Green

Size
08, 09, 10, 11

EN420:2003+A1:2009 General requirements
5 Dexterity (from 1 to 5)

EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
4 Resistance to abrasion (from 1 to 4)
1 Resistance to cutting (from 1 to 5)
2 Resistance to tear (from 1 to 4)
1 Resistance to puncture (1 to 4)
X Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)

EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms – Part 1: Terminology and performance requirements for chemical risks.
TYPE B Type B – Water and air tightness according to EN ISO 374-2:2019. Permeation resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1 to 6).
. Determination of resistance to degradation by chemicals according to EN ISO 374-4: 2019. Part 4: Determination of resistance to degradation by chemicals.
A 2 > 30 mn Méthanol (A) CAS 67-56-1
J 3 > 60 mn n-Heptane (J) CAS 142-85-5
K 5 > 240 mn Caustic soda 40% (K) CAS 1310-73-2
L 2 > 30 mn Sulphuric acid 96 % (L ) CAS 7664-93-9
Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks.
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements against micro- organisms risks.

BACTERIA + FUNGI . BACTERIA + FUNGI : Water and air tightness according to EN ISO 374-2:2019.

Manufacturer: Deltaplus